Hisense TV Red Light Blinks 2 Times
The main reasons why the red light on your Hisense TV blinks twice are that the TV is in Standby Mode, the power supply source is broken, or the power supply board is broken. This is also because the backlight is bad and the TV has a lot of damage inside.
To fix your TV’s red light blinking twice, turn it off and on again or reset it. If resetting the TV doesn’t work, you should check and replace the PSB, backlight, and other broken parts inside the TV.
So, if you read this guide, you’ll find out why the red light on your Hisense TV flashes twice and how to fix it.
Why does my Hisense TV Red Light Blinks 2 Times?
Hisense TVs are some of the most popular and affordable electronics on the market. But, just like any other piece of hardware, Hisense TVs can have bugs and other problems. People often say that their Hisense TV’s red light blinks twice, but the TV doesn’t turn on after that.
One of the main reasons for this error is a problem with the power supply to the TV, the power supply board inside the TV, or a temporary software bug that is keeping the device from working.
In rare cases, a bad power supply board can also cause the red light to flash with no picture. It could also be a problem with the software that makes the TV stay in standby mode.
How to Fix a Hisense TV Red Light Blinks 2 Times
This troubleshooting guide tells you how to fix the main problems that cause your Hisense TV red light blinks 2 times.
Active Standby Mode
The Standby Mode is on, so the red light on your Hisense Roku TV blinks twice. If you use your TV for a long time, it might get stuck in standby mode. Because this Mode is on, your TV won’t respond to any commands from the buttons on the TV or from the remote.
Solution:
If your Hisense TV is blinking twice, you need to reset it. Resetting will help you get your TV back to its original settings, also called “factory defaults.”
Power Source Doesn’t Work
If the power source for your Hisense Smart TV is broken, the red power light might start blinking. Your TV doesn’t get enough power or gets less power because the power supply unit isn’t working right. Because there isn’t enough voltage or energy, the TV can’t work right.
Solution:
If your Hisense TV is blinking red twice, you should check the power source for your TV. Use an extension cord to connect your Hisense TV directly to the wall outlet, and then check to see if the TV is getting power.
Power Supply Board That Doesn’t Work
One of the main reasons your Hisense TV is blinking codes is because the hardware or power supply board is broken. Your TV’s main chip gets the wrong voltage or none at all because the Power Supply Board (PSB) is broken. Because of this, your TV doesn’t get enough voltage or power to turn on, and the red light starts blinking twice.
Solution:
Take off the back of the TV so you can look at the power supply board inside. The PSB is the board inside the TV that weighs the most.
Backlight Not Working
When the backlight doesn’t work, which is a common problem, your Hisense TV will blink red twice. Most of the time, a bad backlight is a reason why your Hisense TV won’t turn on. Also, because of this problem, your TV may stop showing a picture and start flashing red lights, but the sound will be clear. When your TV screen or monitor is out of place, the backlight is most likely to be damaged.
Solution:
Before you try to replace the backlight to fix the flashing power light on your Hisense TV, you should check it. Turn on the flashlight on your phone and point it at your TV. If you can see things on your TV screen, the backlight is broken and needs to be fixed.
Severe Internal Damage
If your Hisense TV has a lot of damage on the inside, it won’t get enough power to work. Because of this, your TV won’t turn on, and the red light will blink twice.
How to Power cycle the Hisense TV
To fix the problem, one of the first things you should do is turn off and on your Hisense TV.
- Pull the TV’s power cord out of the wall.
- Hold on for about 5 minutes.
- Plug the power back in and turn the TV back on.
How to Restart the Hisense TV
Here are a few ways to reset the Hisense TV if turning it off and on again doesn’t work.
- Pull the TV’s power cord out of the wall.
- Wait about fifteen minutes.
- Press and hold the power button on the TV, not the remote, and plug the TV back into the power supply.
- Once you’ve plugged the TV in and turned it on, hold down the power button for about 60 seconds.
If this doesn’t work, move on to the next steps.
- Hold down the remote’s Volume and Menu/Guide buttons at the same time.
- Press the power button and let go of it (on the TV, not the remote).
Check to see if a blue light comes on in both cases. If it does, hold down the Volume and Menu buttons for 15 seconds before letting go.
Final Words
Let’s bring this post to a close on Hisense TV Red Light Blinks 2 times. I hope you’ve done what you needed to do to fix the problem. If it didn’t work, call a TV Repair technician if the TV isn’t under warranty or Hisense Customer Support if it is. I don’t think you should touch the TV’s internal circuits and check them on your own, because you could damage the TV even more.
